best porn
Fashion and Life Style

A Complete Guide to make a Scottish kilt

Scottish kilt

If you’re a do-it-yourselfer who wants to design and Kraft a kilt, this article will guide you to take your first step. Because these kilt-making tips and tactics come directly from our most experienced designers, who have manufactured over 20000 kilts on their own. The gentleman with whom I’m discussing this advice is an expert in both traditional and modern Scottish kilts.

A kilt is a pleated wrapped skirt (duh… it’s not a skirt), but there is also a modern version of the traditional kilt known as the Scottish kilt or modern kilt. I’ll go over how to make a traditional kilt as well as a modern Scottish kilt.

Table of Contents

How to Make a Scottish Kilt?

  1. Get your Measurements Done
  2. prepare your Kilt Material
  3. How to Make an Apron
  4. Carefully Pleat the kilt!
  5. Adjustment of the Hips to the Waist
  6. Trimming the Back of the Pleats
  7. Fringes
  8. waistband
  9. Add a lining
  10. Buckles and Leather Straps
  11. Velcro Inside the Waistband
  12. Completion

How to make a Scottish Kilt?

Making a Scottish kilt or a traditional tartan kilt is similar in that there isn’t much to do in terms of stitching. To Making a Scottish kilt or a conventional tartan kilt demands a lot of care and skill.

Making a modern Scottish kilt also demands stitching expertise and is not something that can be done at home because it involves a lot of technical knowledge. To accomplish this, you must learn to stitch in its all together.

Let’s get started with some principles and strategies for creating a kilt.

Get your Measurements Done

The first step towards making a kilt goes for both a traditional kilt and a traditional kilt to get measurements of your kilt. Mostly, it requires only three measurements for making a basic kilt which are:

  1. Waist
  2. Hips
  3. Length

Prepare Your Kilt Material

A selvage edge appears on the authentic tartan fabric, which forms the bottom hem of the kilt. If the material does not have a finished edge, begin hemming the material at the top and bottom edges, make sure that the hems on both the top and bottom hedges follow the pattern as you stitch. Euro kilt also uses the best materials, especially for their Scottish kilts. Cut two strips of fabric that are wide enough to measure from the waist to the bottom of the hem. It leaves a long middle strip, which can be utilized to make the waistband. Then sew the two broad hemmed pieces together, making sure the pattern matches the rest of the set.

After that, you need to finish the top edge of the material by surging, running a zigzag stitch, or using an anti-fraying spray.

How to Make an Apron

Aprons are the front of kilts that are buckled up to the proper size. However, you will need to make sure that the tartan is appropriately centered. While starting, you should fold at least 6 inches under and then make a deep, double-width pleat on the left side.

Once the safety pin at the hip is reached, continue pleating with a single-width pleat. Then, pin in a wide double set width box pleat at the opposite end of the pleating. The inside apron must now be measured to match the outer apron, and the end must be pinned back.

Carefully Pleat the Kilt!

It is one of the most important aspects of producing a tartan kilt.

There should be eight inches of pleated material on a piece of material, and at least 5/8 to 1 inch of exposed material. Mark a piece of cardboard with the measurements of the one set.

In other words, it’s like two wide strips of color with a narrow stripe in the middle that works best when divided into three sections with the middle stripe centered. Furthermore, an 8-inch set can be broken into 8 or more portions. You can use the cardboard piece as a measurement scale.

To continue the process, but the pleat over the perfectly matched pattern in the next pair. At Euro kilt, we have a team dedicated to specific tasks to provide high-quality kilts for sale to their customers

Basting in Pleats

You need to do two rows of basting around ¼ and ½ of the far from rock bottom fringe of the material. A running stitch can be used to capture the edge of the pleat since it compacts the cloth and makes it easier to deal with while sewing, as well as making steam pressing much easier.

Stitch Your Pleats

You need to use a blind sew beginning at rock bottom of the pleat. Then, fasten the thread 12 inches from the reverse side of the pleat; start two stitches to fasten the bottom, and then pass the needle under three threads of the bottom material before straightening up to the top material of the pleat.

After that, you would like to run the needle from the highest material around three threads to go into reverse to rock bottom. It around produces ten stitches per inch.

Adjustment of the Hips to the Waist

You need to keep the first and the last pleat straight. A dart can also be helpful for keeping that straight. It will adjust the apron for one of the half waist/hip differences and another half should spread equally between the pleats with the help of pins.

You may also mark the angles of the pleat adjustment using a temporary marker in order to ensure straight stitching.

Add Fringes

You need to chop the wide piece of fabric from the length of the skirt. Then you would like to fold this piece in 0.5 in order that it will provide double thickness to the fringes. currently, it is required to be sewed into a double edge accordion within the right facet of the apron.

Add the Waistband

Now you would like to chop the five inches stripe for the waistband. you would like to create positive that the pattern for the apron and therefore the starting of the waistband ought to match. Currently, you would like to show the rock bottom fringe of the sash stripe below ½ inch and sew one to one ½ inch from the highest fringe of the apron of the skirt exploiting the stitching. After that, you would like to overlap the remaining dimension over the highest of the skirt. The liner can hide this facet thus it won’t like any finishing.

Buckles and Leather Straps

You need to punch some holes at the screen of the animal skin straps. After that, you would like to stitch the straps to the within of following to the perimeter wherever you would like to position the highest straps slightly below the sash and therefore the difference simply higher than rock bottom of sewed down pleat. Currently, your purpose is to sew the buckles on the folded space that is two inches to the proper of the fringed size of the apron.

Add Velcro within the waistband

Instead of adding a 3rd strap, it is counsel to use Velcro within the waistband. it is also able to assist you to carry the skirt with or while not a belt.


This was a complete guide that must have helped you to understand how to make a kilt and I am sure you guys must have understood the process. At Euro Kilt, we provide a wide range of Scottish kilts and traditional kilts. For more details, visit our online store

Don’t forget to share this with others.

istanbul escort

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
casino siteleri canlı casino siteleri 1xbet canlı casino siteleri